| Part No | Manufacturer | Application |
|---|
| MAX4502ESA | MaximIC | Low-voltage, SPST, CMOS analog switch. |
| MAX6322HPUK46C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 140ms |
| MX7845BQ | MaximIC | Complete, 12-bit multiplying DAC. 4-quadrant multiplication. |
| MAX241ECWI | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX651MJA | MaximIC | 3.3V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX367CWN | MaximIC | Signal-line circuit protector. |
| MAX542AESD | MaximIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-1 |
| MXD1210ESA | MaximIC | Nonvolatile RAM controller |
| MAX6318LHUK49CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX736EPD | MaximIC | -12V, inverting carrent-mode PWM regulator. |
| MAX626CPA | MaximIC | Dual inverting power MOSFET driver. |
| MAX6316MUK39DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX986ESA | MaximIC | Single, low-power, Rail-to-Rail I/O comparator. Open-drain output voltage extends beyond Vcc. |
| MAX495MJA | MaximIC | Single, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| MAX1270AENG | MaximIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1/2,-1/2 |
| MAX532BMJE | MaximIC | Dual, serial-input, voltage-output, 12-bit MDAC. Error (LSB) +-1 |
| MAX4530EPP | MaximIC | Low-voltage, CMOS analog ICs configured as an 8-channel multiplexer. |
| MAX809MEUR-T | MaximIC | Microprocessor reset circuit. Reset threshold 4.38V. Push-pull active-high reset. 2.5k increments. |
| MAX1489ECSD | MaximIC | +,-15kV ESD-protected, quad, low-power RS-232 line driver |
| MAX6306UK35D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.413(min),3.588(max) Nominal timeout period 1ms. |
| MAX695C/D | MaximIC | Microprocessor supervisory circuit. |
| MAX6379XR38-T | MaximIC | Ultra-low-power voltage detector, 3.8V |
| MAX1044CSA | MaximIC | Switched-capacitor voltage converter |
| DG419CJ | MaximIC | Improved, SPDT (one NO and one NC) analog switch |
| MAX6348UR35-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 3.500V. Order increment 10k |
| MAX6347UR44-T | MaximIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.380V. Standard version. Order increment 2.5k |
| MX7531JD | MaximIC | CMOS 12 bit multiplying D/A converter. Error 0.2% |
| MAX814TCPA | MaximIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. |
| MAX6320PUK32BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX6320PUK44DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
