| Part No | Manufacturer | Application |
|---|
| MAX6320PUK33CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX2410E/D | MaximIC | Low-cost RF up/downconverter with LNA and PA driver. |
| MX7545JN | MaximIC | CMOS 12-bit buffered multiplying DAC. Error +-2 LSB. |
| MXD1000UA100 | MaximIC | 5-tap silicon delay line |
| MAX240CMH | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6318LHUK27BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.700V min, reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX4019EEE | MaximIC | Low-cost, high-speed, single-supply, gain of +2 buffer. |
| MAX3831UCB | MaximIC | +3.3V, 2.5Gbps, SDH/SONET, 4-channel interconnect mux/demux ICs with clock generator. |
| MAX6316MUK33CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX706SMJA | MaximIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 2.93V. Active-low reset output signal. |
| MX7506TQ | MaximIC | Single, 16 channel (1 of 16) monolithic CMOS analog multiplexer. |
| MAX267BMRG | MaximIC | Pin programmable univesal and bandpass filter. Accuracy 2%. |
| MAX6318LHUK25BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.500V min, reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX6314US28D4-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 2.80V. Reset timeout period(min) 1120ms. |
| MAX6380UR44-T | MaximIC | Ultra-low-power voltage detector, 4.4V |
| MAX6316LUK40DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX394C/D | MaximIC | Precision, quad, SPST analog switch |
| MAX4516EUK | MaximIC | +-1V to +-6V dual-supply opration, low-on-resistance, SPST, CMOS analog switch. Normally open (NO). |
| MAX6321HPUK47DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX4533CSP | MaximIC | Quad, Rail-to-Rail, fault-protected, SPDT analog switch. |
| MAX201CWE | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX6316LUK42BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX6318LHUK31DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.080V min, reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| DG306ACWE | MaximIC | CMOS dual and quad analog switch. |
| MAX6321HPUK48BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX6380UR34-T | MaximIC | Ultra-low-power voltage detector, 3.4V |
| MAX6375XR22-T | MaximIC | Ultra-low-power voltage detector, 2.2V |
| MAX6307UK25D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds2.438(min),2.563(max).Nominal timeout period 140ms. |
| MAX614EPA | MaximIC | Dual-slot PCMCIA analog power controller. |
| MAX1481EUB | MaximIC | Software-selectable, half-/full-duplex, slew-rate-limite 12 Mbps, RS-485/RS-422 transceiver. |
