Path: okDatasheet > Semiconductor Datasheet > MaximIC Datasheet > MaximIC-21

MAX6503CMN005-T MX7537LP MAX388CWG MAX6305UK00D1-T MAX6321HPUK38DZ-T MAX6320PUK45BX-T DS1858E-050 MAX6320PUK48DZ-T DG413DK MAX501BMRG MAX501AENG MAX6309UK50D2-T MAX306EQI MAX4074BLESA MAX430CPA MAX111ACWE MAX301EPE MAX4515CUK MAX653C/D MAX6318LHUK31BX-T MX674AKN MAX6316MUK49BW-T

MaximIC Datasheets Catalog-21

Part NoManufacturerApplication
MX674ASD MaximICIndustry standard complete 12-bit A/D converter. 15 microsec. max conversion time. Linearity (LSBs) 1. TEMPCO(ppm/C) 50.
MAX4603CAE MaximICLow on-resistance (2.5om max), quad, SPST, CMOS analog switches (two NO and two NC switches).
MAX6503CMN005-T MaximICLow-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) -5.
MX7537LP MaximICCMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-1 LSB.
MAX388CWG MaximICHigh-voltage, fault-protected analog multiplexer. 8-channel single-ended.
MAX6305UK00D1-T MaximICMultiple-input, programmable reset IC (open-drain reset output, 2 additional undervoltage reset inputs). Nominal timeout period 1ms.
MAX6321HPUK38DZ-T MaximICMicroprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec
MAX6320PUK45BX-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms
DS1858E-050 MaximICDual, temperature-controlled resistors with three monitors, 50KOhm
MAX6320PUK48DZ-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec
DG413DK MaximICImproved, quad, SPST analog switches
MAX501BMRG MaximICVoltage-output, 12-bit multiplying DAC. Error(LSBs) +-3/4.
MAX501AENG MaximICVoltage-output, 12-bit multiplying DAC. Error(LSBs) +-1/2.
MAX6309UK50D2-T MaximICMultiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.875(min),5.125(max) Nominal timeout period 20ms.
MAX306EQI MaximICPrecision, 16-channel, high-performance, CMOS analog multiplexer
MAX4074BLESA MaximICMicropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 60V/V, noninverting gain 61V/V, -3dB BW 66kHZ.
MAX430CPA MaximIC+-15V Chopper-stabilized operational amplifier.
MAX111ACWE MaximICLow-cost, 2-channel, 14-bit serial ADC.
MAX301EPE MaximICPrecision, dual, high-speed analog switch.
MAX4515CUK MaximICLow-voltage, low-on-resistance, SPST, CMOS analog switch. Normally closed (NC), +2V to +12V single-supply operation.
MAX653C/D MaximIC3V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter.
MAX6318LHUK31BX-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.080V min, reset timeout 20ms, typ watchdog timeout 102ms
MX674AKN MaximICIndustry standard complete 12-bit A/D converter. 15 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO(ppm/C) 27.
MAX6316MUK49BW-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 20ms, typ watchdog timeout 6.3ms
MAX3189EUT-T MaximIC1Mbps, 1microA RS-232 transmitter.
MAX166AMJP MaximICCMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1/2 LSB.
MAX4173HEUT-T MaximICLow-cost,voltage-output, high-side current-sense amplifier. Gain 100V/V.
MAX6318LHUK46AZ-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 1ms,typ watchdog timeout 25.6sec
ICL7652CPD MaximICChopper-stabilized operational amplifier
MAX294C/D MaximIC8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 25kHz

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 >>