Path: okDatasheet > Semiconductor Datasheet > MaximIC Datasheet > MaximIC-32

310UK47D3-T MAX931CUA MAX180CCPL MAX6318MHUK29AW-T MAX2364ECM MX7541AAD MAX6321HPUK47CZ-T MAX232CSE MAX6310UK29D1-T MAX4174BKEUK-T MAX992ESA MAX483MJA MAX3486C/D MAX642AEPA MAX4511C/D MAX6347UR33-T MAX398MJE MAX731MJA MAX6806US46-T MAX712ESE MAX6312UK47D4-T MAX514AENG IH5041MJE M

MaximIC Datasheets Catalog-32

Part NoManufacturerApplication
MAX6310UK41D2-T MaximICMultiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.998(min),4.203(max). Nominal timeout period 20ms.
MAX6310UK47D3-T MaximICMultiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.583(min),4.818(max). Nominal timeout period 140ms.
MAX931CUA MaximICSingle low-power, low-cost comparator with intarnal 1.182V+-2% bandgap reference and internal programmable hysteresis..
MAX180CCPL MaximICComplete, 8-channele, 12-bit data-acquisition system. Error(LSB) +-1.
MAX6318MHUK29AW-T MaximICMicroprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms
MAX2364ECM MaximICComplete dual-band quadrature transmitter
MX7541AAD MaximICCMOS 12 bit multiplying D/A converter. Error 1 LSB.
MAX6321HPUK47CZ-T MaximICMicroprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec
MAX232CSE MaximIC+5V-powered, multichannel RS-232 driver-receiver.
MAX6310UK29D1-T MaximICMultiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.857(min),3.000(max). Nominal timeout period 1ms.
MAX4174BKEUK-T MaximICSingle, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 50, 1+ (Rf/Dg) noninverting gain 51, -3dB BW 330kHz.
MAX992ESA MaximICDual, micropower, low-voltage, Rail-to-Rail I/O comparator. Open-drain output voltage extends beyond Vcc.
MAX483MJA MaximICLow-power, slew-rate-limited RS-485/RS-422 transceiver. Half-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - yes. Receiver/driver enable - yes. Quiescent current - 120 microA. Number of transmitter on bus - 32.
MAX3486C/D MaximIC3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 2.5Mbps. Supply voltage 3.0V to 3.6V
MAX642AEPA MaximIC+12V fixed output, 10W CMOS step-up switching regulator. 5% output accuracy
MAX4511C/D MaximICQuad, Rail-to-Rail, fault-protected, SPST analog switch.
MAX6347UR33-T MaximICMicroprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 3.300V. Order increment 10k
MAX398MJE MaximICPrecision, 8-channel, low-voltage, CMOS analo0g multiplexer.
MAX731MJA MaximIC5V step-up current-mode DC-DC converter
MAX6806US46-T MaximICVoltage detector. Reset output active-low, push-pull. Threshold reset 4.6V
MAX712ESE MaximICNiCd/NiMH battery fast-charge controller (by detecting zero voltage slope).
MAX6312UK47D4-T MaximICMultiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.583(min) 4.818(max). Nominal timeout period 1120ms.
MAX514AENG MaximICCMOS quad, 12-bit, serial-input multiplying DAC. DNL(LSBs) +-1/2.
IH5041MJE MaximICGeneral-purpose CMOS analog switch. Dual, single pole, single throw (Dual SPST)
MX7542JN MaximICCMOS microprocessor-compatible 12 bit DAC. Error +1 LSB.
MX7528LEWP MaximICCMOS dual 8 bit buffered multiplying DAC. +5V to 15V single supply operation. Error +-1/2 LSB.
MAX4541EPA MaximICLow-voltage, single-supply dual SPST analog switch.
MAX3287CUE MaximIC3.0V to 5.5V, 1.25Gbps LAN laser driver.
DG405DJ MaximICImproved, dual, DPST, NO, high-speed analog switch.
MAX122BCNG MaximIC500ksps, 12-bit ADCs with track/hold and reference, INL (LSBs) +1

<< 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 >>