| Part No | Manufacturer | Application |
|---|
| MAX213CWI | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX4588CPI | MaximIC | Low-voltage, high-isolation, dual 4-channel RF and video multiplexer. |
| MAX435EPD | MaximIC | Wideband transconductance amplifier. 275MHz bandwidth, 450microA shutdown capability. |
| MAX207EAG | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX4240EUK-T | MaximIC | Single, ultra-low-voltage operation guaranteed down to +1.8V, typical operation to +1.5V, 10microA supply current, Beyond-the-Rail op amp. |
| MAX627CSA | MaximIC | Dual non-inverting power MOSFET driver. |
| MAX6355LSUT-T | MaximIC | Triple-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.93V (Vcc3). Active-low open-drain reset. Standard version. |
| MX7520TQ | MaximIC | CMOS 10 bit multiplying D/A converter. Error 0.1% |
| DG301ACJ | MaximIC | Quad, TTL compatible CMOS analog switch. |
| MAX5353BCPA | MaximIC | Low-power, 12-bit voltage-output DAC with serial interface. INL (LSB) +-2. +3.3V single-supply operation. |
| MAX6317HUK29CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX9005ESA | MaximIC | Low-power, high-speed, single-supply op amp + comparator. Op-Amp gain stability 10V/V. Op-Amp gain bandwidth 8MHz. |
| MAX339EJE | MaximIC | Dual 4-channel, low-leakage, CMOS analog multiplexer. |
| MAX971EPA | MaximIC | Ultra-low-power, open-drain, single comparator. Internal precision reference 1%. Internal hysteresis yes. |
| MAX767TCAP | MaximIC | 5V-to-3.3V, Synchronous, step-down power-supply controller. Ref.tol.+-1.2%, Vout 3.3V |
| ICL7642CCJD | MaximIC | Quad operational amplifier, 10mV |
| MAX6316MUK28BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX149AEAP | MaximIC | +2.7V to +5.25V, low-power, 8-channel, serial 10-bit ADC. INL(LSB) +-1/2. |
| MAX384MJN | MaximIC | Low-voltage, dual 4-channel multiplexer with latchable inputs. |
| MAX792LESE | MaximIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V |
| MAX6313UK31D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.003(min) 3.157(max).Nominal timeout period 1120ms. |
| MX752CD | MaximIC | CMOS 8-bit buffered multiplying DAC. TTL/CMOS compatible at +5V. Error +-1/8 LSB |
| MAX782SEBX | MaximIC | Triple-output power-supply controller for notebook computer. Vout 3.6V |
| MAX6380XR36-T | MaximIC | Ultra-low-power voltage detector, 3.6V |
| MAX6312UK25D2-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 2.438(min) 2.563(max). Nominal timeout period 20ms. |
| MAX747MJD | MaximIC | High-efficiency, PWM, step-down P-channel DC-DC controller |
| MAX6316LUK38DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX6306UK46D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.514(min),4.746(max) Nominal timeout period 20ms. |
| MAX6320PUK35DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX5101BEUE | MaximIC | +2.7V to 5.5V, low-power, triple, parallel 8-bit DAC with Rail-to-Rail voltage output. INL (LSB) +-2 |
